PNX1500E/G,557 NXP Semiconductors, PNX1500E/G,557 Datasheet - Page 233

• Manufacturer Part Number: PNX1500E/G,557
• Description: IC MEDIA PROC 240MHZ 456-BGA
• Manufacturer: NXP Semiconductors

Specifications of PNX1500E/G,557

• Applications: Multimedia
• Core Processor: TriMedia
• Controller Series: Nexperia
• Interface: I²C, 2-Wire Serial
• Number Of I /o: 61
• Voltage - Supply: 1.14 V ~ 1.26 V
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 456-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Type: -
• Ram Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 568-1296; 935277746557; PNX1500E/G

Philips Semiconductors
Volume 1 of 1
PNX15XX_SER_3
Product data sheet
All IDE disk registers (eight command and one control) are accessible via PI. All IDE
disk registers are indirectly accessed via GPXIO registers.
diagram of the IDE interface.
The IDE port is multiplexed with PCI, FLASH and Motorola interface pins. There are
two dedicated pins, IDE_ENABLE (in this example XIO_SEL[1]) and INTREQ. The
IDE Disk interrupt (INTREQ) is connected to a GPIO signal, which is routed to the
VIC through GPIO or any direct interrupt line.
The PNX15xx Series SYS_RSTN_OUT can be connected with the IDE interface
reset. All outputs are driven on PCI_CLK. All inputs are registered on PCI_CLK. The
Low and High periods of DIOR/DIOW are programmable (using sel profile register).
All physical signals need to be isolated from PCI on the board as shown in
Figure 11: IDE Interface
PNX15xx
Rev. 3 — 17 March 2006
PCI AD[31:16] - DD[15:0]
XIO_SEL[1] - IDE_ENABLE
PCI_AD0 - IORDY
Outputs
INTREQ
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Chapter 7: PCI-XIO Module
PNX15xx Series
Figure 11
IDE Cable
shows a block
Figure 12
7-14