PNX1500E/G,557 NXP Semiconductors, PNX1500E/G,557 Datasheet - Page 684

• Manufacturer Part Number: PNX1500E/G,557
• Description: IC MEDIA PROC 240MHZ 456-BGA
• Manufacturer: NXP Semiconductors

Specifications of PNX1500E/G,557

• Applications: Multimedia
• Core Processor: TriMedia
• Controller Series: Nexperia
• Interface: I²C, 2-Wire Serial
• Number Of I /o: 61
• Voltage - Supply: 1.14 V ~ 1.26 V
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 456-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Type: -
• Ram Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 568-1296; 935277746557; PNX1500E/G

Philips Semiconductors
Volume 1 of 1
Table 2: LAN100 Registers
PNX15XX_SER_3
Product data sheet
Bit
The values represent the status of the three channels/datapaths. In case the status is 1 the channel is active meaning it:
The status transitions from active to inactive if the channel is disabled by software resetting the Tx/Rt/TxRtEnable bit in the
Command register and if the channel has committed the status and data of the current frame to memory. The status also
transition to inactive if the transmit queue is empty or if the receive queue is full and status and data have been committed to
memory.
31:3
2
1
0
Offset 0x07 2108
The receive descriptor base address is a byte address aligned to a word boundary, (i.e. the two LSBs of the address are
fixed to 0). The register contains the lowest address in the array of descriptors.
31:2
1:0
Offset 0x07 210c
The receive status base address is a byte address aligned to a double word boundary i.e. LSB 2:0 are fixed to 3’b000.
31:3
2:0
Offset 0x07 2110
This register defines the number of descriptors in the descriptor array for which RxDescriptor is the base address. The
number of descriptors should match the number of states. The register uses minus-one encoding, i.e. if the array has 8
status elements, the value in the register should be 7.
31:16
15:0
Offset 0x07 2114
This register indexes the descriptor that is going to be filled next by the Receive Datapath. After a packet has been received,
hardware increments the index and wrapps to 0 when the value of RxDescriptorNumber has been reached. If the
RxProduceIndex equals RxConsumeIndex – 1, the array is full, and any further packets being received will cause a buffer
overrun error.
31:16
15:0
Offset 0x07 2118
• is enabled and the Rx/TxRt/TxEnable bit is set in the Command register or it just got disabled while still transmitting or
• and for transmit channels the transmit queue is not empty i.e. ProduceIndex != ConsumeIndex
• and for the receive channel the receive queue is not full i.e. ProduceIndex != ConsumeIndex - 1
receiving a frame
Symbol
-
TxRtStatus
TxStatus
RxStatus
RxDescriptor
-
RxStatus
-
-
RxDescriptorNumber
-
Rx Produce Index
Receive Descriptor Base Address Register (RxDescriptor)
Receive Status Base Address Register (RxStatus)
Receive Number of Descriptors Register (RxDescriptorNumber)
Receive Produce Index (RxProduceIndex)
Receive Consume Index (RxConsumeIndex)
…Continued
Acces
s
-
RO
RO
RO
R/W
RO
R/W
RO
-
R/W
-
RO
Value
0
0
0
0
0
Rev. 3 — 17 March 2006
Description
Unused
If ‘1’, the real-time transmit datapath is active. If ‘0’, the channel is
inactive.
If ‘1’, non-real-time transmit datapath is active. If ‘0’, the channel is
inactive.
If ‘1’, the receive datapath is active, if ‘0’, the channel is inactive.
MSBs of receive descriptor base address.
Fixed to 0.
MSBs of receive status base address.
Fixed to 0.
Unused
Number of descriptors in the descriptor array for which RxDescriptor
is the base address. The number of descriptors is minus-one
encoded.
Unused
Index of the descriptor that is going to be filled next by the Receive
Datapath.
Chapter 23: LAN100 — Ethernet Media Access Controller
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
PNX15xx Series
23-15