LPC1343FHN33,551 NXP Semiconductors, LPC1343FHN33,551 Datasheet - Page 4

• Manufacturer Part Number: LPC1343FHN33,551
• Description: IC MCU 32BIT 32KB FLASH 33HVQFN
• Manufacturer: NXP Semiconductors
• Series: LPC13xxr

Specifications of LPC1343FHN33,551

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 33-VQFN Exposed Pad, 33-HVQFN, 33-SQFN, 33-DHVQFN
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 72MHz
• Connectivity: I²C, Microwire, SPI, SSI, SSP, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 28
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC13
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 28
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, KSK-LPC1343
• Development Tools By Supplier: OM11039, OM11040, OM11046, OM11048
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 33HVQFN EP
• Device Core: ARM Cortex M3
• Family Name: LPC1000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4944; 935289655551

NXP Semiconductors
UM10375
User manual
•
•
•
•
•
•
•
•
•
Other peripherals:
– Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down
– GPIO pins can be used as edge and level sensitive interrupt sources.
– High-current output driver (20 mA) on one pin.
– High-current sink drivers (20 mA) on two I
– Four general purpose counter/timers with a total of four capture inputs and 13
– Programmable WatchDog Timer (WDT).
– System tick timer.
Analog peripherals
– 10-bit ADC with input multiplexing among 8 pins.
Clocking
– Integrated oscillator with an operating range of 1 MHz to 25 MHz.
– 12 MHz internal RC oscillator trimmed to 1% accuracy over the entire temperature
– Programmable WatchDog Oscillator (WDO) with a frequency range of 7.8 kHz to
– System PLL allows CPU operation up to the maximum CPU rate without the need
– For USB (LPC1342/43), a second, dedicated PLL is provided.
– Clock output function with divider that can reflect the system oscillator clock, IRC
Power management
– Integrated PMU (Power Management Unit) to minimize power consumption during
– Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
– Processor wake-up from Deep-sleep mode via a dedicated start logic using up to
Single power supply (2.0 V to 3.6 V).
Brownout detect with four separate thresholds for interrupt and one threshold for
forced reset.
Power-On Reset (POR).
Unique device serial number for identification.
Available as 48-pin LQFP package and 33-pin HVQFN package.
resistors.
match outputs.
and voltage range that can optionally be used as a system clock.
1.8 MHz.
for a high-frequency crystal. May be run from the system oscillator or the internal
RC oscillator.
clock, CPU clock, or the watchdog clock.
Sleep, Deep-sleep, and Deep power-down modes.
40 of the functional pins.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 July 2010
Chapter 1: LPC13xx Introductory information
2
C-bus pins in Fast-mode Plus.
UM10375
© NXP B.V. 2010. All rights reserved.
5 of 333