D12332VFC20V Renesas Electronics America, D12332VFC20V Datasheet - Page 244

• Manufacturer Part Number: D12332VFC20V
• Description: IC H8S/2332 MCU ROMLESS 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12332VFC20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit 5—Repeat Enable (RPE): Used in combination with the DTIE bit in DMABCR to select the
mode (sequential, idle, or repeat) in which transfer is to be performed.
Bit 5
RPE
0
1
For details of operation in sequential, idle, and repeat mode, see section 7.5.2, Sequential Mode,
section 7.5.3, Idle Mode, and section 7.5.4, Repeat Mode.
Bit 4—Data Transfer Direction (DTDIR): Used in combination with the SAE bit in DMABCR
to specify the data transfer direction (source or destination). The function of this bit is therefore
different in dual address mode and single address mode.
DMABCR
SAE
0
1
Rev.4.00 Sep. 07, 2007 Page 212 of 1210
REJ09B0245-0400
DMABCR
DTIE
0
1
0
1
Bit 4
DTDIR
0
1
0
1
Description
Transfer in sequential mode (no transfer end interrupt)
Transfer in sequential mode (with transfer end interrupt)
Transfer in repeat mode (no transfer end interrupt)
Transfer in idle mode (with transfer end interrupt)
Description
Transfer with MAR as source address and IOAR as destination
address
Transfer with IOAR as source address and MAR as destination address
Transfer with MAR as source address and DACK pin as write strobe
Transfer with DACK pin as read strobe and MAR as destination address
(Initial value)
(Initial value)