D12332VFC20V Renesas Electronics America, D12332VFC20V Datasheet - Page 899

• Manufacturer Part Number: D12332VFC20V
• Description: IC H8S/2332 MCU ROMLESS 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12332VFC20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Software standby mode is then cleared at the rising edge on the NMI pin.
21.6.5
I/O Port Status: In software standby mode, I/O port states are retained. If the OPE bit is set to 1,
the address bus and bus control signal output is also retained. Therefore, there is no reduction in
current dissipation for the output current when a high-level signal is output.
Current Dissipation during Oscillation Stabilization Wait Period: Current dissipation
increases during the oscillation stabilization wait period.
Write Data Buffer Function: The write data buffer function and software standby mode cannot
be used at the same time. When the write data buffer function is used, the WDBE bit in BCRL
should be cleared to 0 to cancel the write data buffer function before entering software standby
mode. Also check that external writes have finished, by reading external addresses, etc., before
executing a SLEEP instruction to enter software standby mode. See section 6.9, Write Data Buffer
Function, for details of the write data buffer function.
Oscillator
φ
NMI
NMIEG
SSBY
Usage Notes
Figure 21.2 Software Standby Mode Application Example
NMI exception
handling
NMIEG=1
SSBY=1
SLEEP instruction
Software standby mode
(power-down mode)
Rev.4.00 Sep. 07, 2007 Page 867 of 1210
stabilization
Oscillation
time t
OSC2
NMI exception
REJ09B0245-0400
handling