AT32AP7002-CTUT Atmel, AT32AP7002-CTUT Datasheet - Page 536

• Manufacturer Part Number: AT32AP7002-CTUT
• Description: IC MCU 32BIT AVR32 196-CBGA
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7002-CTUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, LCD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 196-CBGA
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, JTAG, PS2, SPI, SSC, UART, USART, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 2 Channel
• Package: 196CTBGA
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

Figure 28-7. Read Burst with Boundary Row Access
28.7.5
32054F–AVR32–09/09
SDRAMC_A[12:0]
D[15:0]
SDWE
SDCS
SDCK
RAS
CAS
SDRAM Controller Refresh Cycles
Col a
Row n
Col b
Dna
An auto refresh command is used to refresh the SDRAM device. Refresh addresses are gener-
ated internally by the SDRAM device and incremented after each auto refresh automatically.
The SDRAMC generates these auto refresh commands periodically. An internal timer is loaded
with the value in the Refresh Timer Register (TR) that indicates the number of clock cycles
between successive refresh cycles.
A refresh error interrupt is generated when the previous auto refresh command did not perform.
In this case a Refresh Error Status bit is set in the Interrupt Status Register (ISR.RES). It is
cleared by reading the ISR register.
When the SDRAMC initiates a refresh of the SDRAM device, internal memory accesses are not
delayed. However, if the CPU tries to access the SDRAM, the slave indicates that the device is
busy and the master is held by a wait signal. See
Col c
Dnb
Col d
Dnc
Dnd
T
RP
= 3
Row m
T
RCD
= 3
Figure 28-8 on page
Col a
CAS = 2
Col b
Dma
Col c
537.
Dmb
AT32AP7002
Col d
Dmc
Col e
Dmd
Dme
536