ATMEGA128A-AU Atmel, ATMEGA128A-AU Datasheet - Page 41

• Manufacturer Part Number: ATMEGA128A-AU
• Description: MCU 8BIT 128K ISP FLASH 64-TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA128A-AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Processor Series: ATMEGA128x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: JTAG
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 8 Channel
• Cpu Family: ATmega
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 16MHz
• Total Internal Ram Size: 4KB
• # I/os (max): 53
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4784435

8.5
8.6
8151H–AVR–02/11
Low-frequency Crystal Oscillator
External RC Oscillator
Table 8-4.
Notes:
To use a 32.768 kHz watch crystal as the clock source for the device, the Low-frequency Crystal
Oscillator must be selected by setting the CKSEL fuses to “1001”. The crystal should be con-
nected as shown in
capacitors on XTAL1 and XTAL2, thereby removing the need for external capacitors. The inter-
nal capacitors have a nominal value of 36pF.
When this Oscillator is selected, start-up times are determined by the SUT fuses as shown in
Table
Table 8-5.
Note:
For timing insensitive applications, the External RC configuration shown in
used. The frequency is roughly estimated by the equation f = 1/(3RC). C should be at least
22pF. By programming the CKOPT fuse, the user can enable an internal 36 pF capacitor
between XTAL1 and GND, thereby removing the need for an external capacitor. For more infor-
mation on Oscillator operation and details on how to choose R and C, refer to the External RC
Oscillator application note.
CKSEL0
SUT1:0
00
01
10
11
1
1
1
8-5.
1. These options should only be used when not operating close to the maximum frequency of the
2. These options are intended for use with ceramic resonators and will ensure frequency stability
1. These options should only be used if frequency stability at start-up is not important for the
device, and only if frequency stability at start-up is not important for the application. These
options are not suitable for crystals.
at start-up. They can also be used with crystals when not operating close to the maximum fre-
quency of the device, and if frequency stability at start-up is not important for the application.
application.
SUT1:0
Start-up Times for the Crystal Oscillator Clock Selection (Continued)
Start-up Times for the Low-frequency Crystal Oscillator Clock Selection
Start-up Time from
Power-down and
01
10
11
Power-save
Figure
1K CK
1K CK
32K CK
Power-down and Power-
(1)
(1)
Start-up Time from
8-2. By programming the CKOPT fuse, the user can enable internal
16K CK
16K CK
16K CK
save
from Reset (V
Additional Delay
4.1ms
65ms
65ms
5.0V)
Reserved
from Reset (V
Additional Delay
CC
=
4.1ms
5.0V)
65ms
–
Recommended Usage
Fast rising power or BOD enabled
Slowly rising power
Stable frequency at start-up
CC
=
ATmega128A
Recommended Usage
Crystal Oscillator, BOD
enabled
Crystal Oscillator, fast
rising power
Crystal Oscillator, slowly
rising power
Figure 8-3
can be
41