XW2Z-070T-1 Omron, XW2Z-070T-1 Datasheet - Page 104

• Manufacturer Part Number: XW2Z-070T-1
• Description: Special Nissan
• Manufacturer: Omron
• Series: XW2Zr
• Type: DB09r

Specifications of XW2Z-070T-1

• 1st Connector: Plug, Male Pins
• 2nd Connector: Plug, Male Pins
• Number Of Positions: 9
• Length: 2.3' (701.0mm)
• Color: Beige, Individual (Round)
• Usage: Communication
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z070T1

6-1
6-1-1
6-1-2
92
Initial Settings
DM 6603
DM 6603
Word
Word
Initial Settings
Setting the Maximum Number of Nodes
Setting the CompoBus/S Communications Mode
00 to 03
04 to 07
Bits
Bits
Sets the max. number of Compo-
Bus/S Slaves to 16 or 32.
Note
Sets the CompoBus/S communi-
cations mode.
CPM2B-S
Note Always turn the power OFF and ON again after changing this setting.
The maximum number of Slaves that can be connected through CompoBus/S
can be set to 16 or 32 Slaves.
Use a Programming Device to set the maximum number of Slaves in
DM 6603 of the PC Setup, as shown in the following table.
1. Always turn the power OFF and ON again after changing this setting.
2. The communications response time is affected by the max. number of
The CompoBus/S communications mode can be set to high-speed mode or
long-distance mode.
Use a Programming Device to set the maximum number of Slaves in
DM 6603 of the PC Setup, as shown in the following table.
High-speed mode
Long-distance mode
High-speed mode
Long-distance mode 500 m
Communications mode
Communications
Slaves setting as shown below.
mode
Function
Function
Slave
CompoBus/S communications path
100 m
distance (trunk line length)
0 (Hex): 32 Slaves
1 (Hex): 16 Slaves
0 (Hex): High-speed mode
1 (Hex): Long-distance mode
Max. communications
16
32
16
32
Max. number of Slaves
16 or 32 Slaves max.
Slave
Slave
750 kbps
93.75 kbps
Communications speed
0 or 1
0.5 ms
0.8 ms
4.0 ms
6.0 ms
0 or 1
Settings
Settings
Terminator
Communications
response time
Section 6-1
0
(High-speed)
0
(32 Slaves)
Default
Default