XW2Z-070T-1 Omron, XW2Z-070T-1 Datasheet - Page 23

• Manufacturer Part Number: XW2Z-070T-1
• Description: Special Nissan
• Manufacturer: Omron
• Series: XW2Zr
• Type: DB09r

Specifications of XW2Z-070T-1

• 1st Connector: Plug, Male Pins
• 2nd Connector: Plug, Male Pins
• Number Of Positions: 9
• Length: 2.3' (701.0mm)
• Color: Beige, Individual (Round)
• Usage: Communication
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z070T1

1-2-4
1-2-5
10
System Configurations
RS-232C Port Connection
IBM PC/AT or
compatible computer
One-to-one Computer Connections
Support Software
RS-232C port
(D-sub 9-pin)
Connecting Cable
XW2Z-200S-V (2 m)
XW2Z-500S-V (5 m)
CPM2B-S CPU Board
Note
OUT010CH
IN000CH
A personal computer running the CX-Programmer or SYSMAC-CPT Support
Software (in MS Windows) or the SSS (in MS-DOS) can be connected to the
CPU Board’s Peripheral port or RS-232C port. Refer to 1-2-5 One-to-one
Computer Connections for details on the computer connection.
The setting of DIP Switch pin 3 determines whether the communications set-
tings in the PC Setup or the standard settings will be used, as shown in the
following table.
When using the SSS, set the PC Model to “CQM1.” When using the SYS-
MAC-CPT, set the PC Model to “CQM1” with the “CPU43” CPU version.
Use one of the connecting cables shown in the following diagram to connect a
personal computer with Support Software to the CPM2B-S for a 1:1 Host Link
communications or no-protocol (serial) communications.
1. The CQM1-CIF11 Connecting Cable cannot be used.
2. Refer to Appendix A Standard Models for details on the Support Software
IN001CH
OUT011CH
ON
OFF
setting
OUT012CH
Pin 3
IN002CH
that can be used with the CPM2B-S.
Standard settings (The standard settings and PC Setup default settings
are Host Link communications at 9,600 bps with 1 start bit, 7-bit data, 2
stop bits, and even parity.)
PC Setup settings in DM 6650 and
DM 6651
Peripheral Port Connection
IBM PC/AT or
compatible computer
Peripheral port
Connecting Cable
XW2Z-200S-V (2 m)
XW2Z-500S-V (5 m)
Communications settings
CQM1-CIF02
(3.3 m)
CPM1-CIF01
RS-232C Adapter
PC Setup settings in DM 6645 and
DM 6646
RS-232C port
CPM2B-S CPU Board
CS1W-CN114
(0.05 m)
Peripheral port
Section 1-2
OUT010CH
IN000CH
IN001CH
OUT011CH
OUT012CH
IN002CH