XW2Z-070T-1 Omron, XW2Z-070T-1 Datasheet - Page 48

• Manufacturer Part Number: XW2Z-070T-1
• Description: Special Nissan
• Manufacturer: Omron
• Series: XW2Zr
• Type: DB09r

Specifications of XW2Z-070T-1

• 1st Connector: Plug, Male Pins
• 2nd Connector: Plug, Male Pins
• Number Of Positions: 9
• Length: 2.3' (701.0mm)
• Color: Beige, Individual (Round)
• Usage: Communication
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z070T1

Electrical Noise
Accessibility
3-3
Board Assembly
36
Assembling the CPM2B-S Boards
Assembling the CPM2B-S Boards
Note
Power lines and high-voltage equipment can cause electrical noise in the PC.
Ensure that the CPM2B-S can be accessed for normal operation and mainte-
nance. High-voltage equipment, power lines, and moving machinery could be
dangerous if they are in the way during routine operations.
Up to 3 Expansion I/O Boards can be connected to a CPM2B-S CPU Board.
The following diagram shows how to assemble the Boards. The screws and
standoffs are included with the CPU Board, Expansion I/O Board, and Mount-
ing Bracket.
The CPM2B-S Boards can be installed in any direction, but the maximum
ambient operating temperature is 50°C instead of 55°C if the Boards are
installed with the power supply terminals up.
1. Use M3 screws for the standoffs and tighten to a torque of 0.5 N•m.
2. When using an Expansion I/O Board, refer to the CPM2B Operation Man-
• Do not install the CPM2B-S in a panel or cabinet with high-voltage equip-
• Allow at least 200 mm between the CPM2B-S and nearby power lines.
ment.
ual (W371) for information on the installation directions, the number of in-
puts that can be ON simultaneously, and the affects of ambient
temperature.
200 mm min.
CPM2B-S
Down
Up
200 mm min.
Section 3-3