XW2Z-070T-1 Omron, XW2Z-070T-1 Datasheet - Page 163

• Manufacturer Part Number: XW2Z-070T-1
• Description: Special Nissan
• Manufacturer: Omron
• Series: XW2Zr
• Type: DB09r

Specifications of XW2Z-070T-1

• 1st Connector: Plug, Male Pins
• 2nd Connector: Plug, Male Pins
• Number Of Positions: 9
• Length: 2.3' (701.0mm)
• Color: Beige, Individual (Round)
• Usage: Communication
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z070T1

Precautions
Replacement Procedure
152
Battery Replacement
1,2,3...
Turn ON the power supply for at least 5 minutes before replacing the battery in
order to recharge the backup capacitor.
Turn OFF the power supply to the CPU Board before replacing the battery.
Use the procedure below when replacing the battery. This procedure must be
completed within 5 minutes to prevent loss of memory contents.
Dispose of the old battery properly.
The life of the battery is 5 years at 25°C. Use the following procedure to
replace the backup battery.
1. Stop CPM2B-S operation and turn OFF the CPM2B-S’s power supply.
2. Disconnect the battery connector and remove the battery.
3. Install the new battery. Check the alignment of the connector and fully in-
4. Enable the detection of battery errors in the PC Setup by setting the left-
sert the connector. Make sure that the power wires are not pinched.
most digit of DM 6655 to 0.
Section 9-6