XW2Z-070T-1 Omron, XW2Z-070T-1 Datasheet - Page 11

• Manufacturer Part Number: XW2Z-070T-1
• Description: Special Nissan
• Manufacturer: Omron
• Series: XW2Zr
• Type: DB09r

Specifications of XW2Z-070T-1

• 1st Connector: Plug, Male Pins
• 2nd Connector: Plug, Male Pins
• Number Of Positions: 9
• Length: 2.3' (701.0mm)
• Color: Beige, Individual (Round)
• Usage: Communication
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z070T1

Operating Environment Precautions
4
Operating Environment Precautions
! W A R N I N G
! W A R N I N G
! C a u t i o n
! C a u t i o n
! C a u t i o n
! C a u t i o n
Provide safety measures in external circuits (i.e., not in the Programmable
Controller), including the following items, in order to ensure safety in the sys-
tem if an abnormality occurs due to malfunction of the PC or another external
factor affecting the PC operation. Not doing so may result in serious acci-
dents.
When transferring programs to other nodes, or when making changes to I/O
memory, confirm the safety of the destination node before transfer. Not doing
so may result in injury.
Execute online edit only after confirming that no adverse effects will be
caused by extending the cycle time. Otherwise, the input signals may not be
readable.
Tighten the screws on the terminal block to the torque specified in the opera-
tion manual. The loose screws may result in burning or malfunction.
Do not operate the control system in the following places:
Take appropriate and sufficient countermeasures when installing systems in
the following locations:
• Emergency stop circuits, interlock circuits, limit circuits, and similar safety
• The PC will turn OFF all outputs when its self-diagnosis function detects
• The PC outputs may remain ON or OFF due to deposition or burning of
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified
• Locations subject to condensation as the result of severe changes in tem-
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
measures must be provided in external control circuits.
any error or when a severe failure alarm (FALS) instruction is executed.
As a countermeasure for such errors, external safety measures must be
provided to ensure safety in the system.
the output relays or destruction of the output transistors. As a counter-
measure for such problems, external safety measures must be provided
to ensure safety in the system.
in the specifications.
perature.
xiii
4