pef2256e Infineon Technologies Corporation, pef2256e Datasheet - Page 282

• Manufacturer Part Number: pef2256e
• Description: E1/t1/j1 Framer And Line Interface Component For Long- And Short-haul Applications
• Manufacturer: Infineon Technologies Corporation

Port Configuration 6 (Read/Write)
Value after reset: 00
PC6
SXCL(1:0)
SCL(2:0)
User’s Manual
Hardware Description
7
Select Transmit Clock Frequency on Port CLK2
Port CLK2 is the de-jittered DCO-X clock at a frequency of
00 = 2.048 MHz
01 = 4.096 MHz
10 = 8.192 MHz
11 = 16.384 MHz
Select System Clock Frequency on Port CLK1
Port CLK1 is the de-jittered DCO-R clock at a frequency of
000 = 8 kHz
001 = 2.048 MHz
010 = 4.096 MHz
011 = 8.192 MHz
100 = 16.384 MHz
101 to 111 = Not defined
Note: If DCO-R is not active, no clock is output on pin CLK1
Note: If DCO-X is not used, no clock is output on pin CLK2
(SIC1.RBS(1:0)=11 and CMR1.RS1=0).
(SIC1.XBS(1:0)=00 and CMR1.DXJA=1; buffer bypass and
no jitter attenuation)
SXCL1
282
SXCL0
SCL2
SCL1
DS1.1, 2003-10-23
PEF 2256 H/E
SCL0
E1 Registers
0
FALC
(86)
®
56