IPT-DSPBUILDER Altera, IPT-DSPBUILDER Datasheet - Page 120

• Manufacturer Part Number: IPT-DSPBUILDER
• Description: DSP BUILDER SOFTWARE
• Manufacturer: Altera
• Type: DSPr

Specifications of IPT-DSPBUILDER

• Function: DSP Builder
• License: Initial License
• Software Application: IP CORE, DSP BUILDER
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Supported Families: Arria GX, Arria II GX, Cyclone, Stratix
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable

7–12
Running Signal Compiler
Instantiating the Design in SOPC Builder
DSP Builder Standard Blockset User Guide
3. Click OK.
To generate all the hardware and files required by the Quartus II software, follow
these steps:
1. Double-click on the Signal Compiler block to display the Signal Compiler
2. Verify that the Device is set to match your target development kit and click
3. When the compilation has completed successfully, click OK.
To instantiate your design as a custom peripheral to the Nios II embedded processor
in SOPC Builder, follow these steps:
1. Start the Quartus
2. On the File menu in the Quartus II software, click New Project Wizard.
3. On the Tools menu, click Tcl Scripts and follow these steps:
4. On the Tools menu, click SOPC Builder and set the following parameters in the
dialog box.
Compile.
a. Specify the working directory for your project by browsing to <DSP Builder
b. Specify a name for your project. This tutorial uses SOPC for the project name.
1
c. Click Next in the New Project Wizard, until you get to the Family and Device
d. Click Finish to create the Quartus II project.
a. Select topavalon_add.tcl in the Project folder.
b. Click Run to load your .mdl file and other required files into the Quartus II
Create New System dialog box:
a. Specify SOPC as the system name.
b. Select VHDL for the target HDL.
c. Click OK.
install path>\DesignExamples\Tutorials\SOPCBuilder\SOPCBlock\
MySystem.
Settings page. Verify that the selected device matches the FPGA on your DSP
development board (if applicable).
project.
The Quartus II software automatically specifies a top-level design entity
that has the same name as the project. This tutorial assumes that the names
are the same.
®
II software.
Preliminary
Avalon-MM Interface Blocks Design Example
Chapter 7: Using the Interfaces Library
© June 2010 Altera Corporation