AT91SAM9G45-CU-999 Atmel, AT91SAM9G45-CU-999 Datasheet - Page 1123

• Manufacturer Part Number: AT91SAM9G45-CU-999
• Description: IC MCU ARM9 APMC 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G45-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Supplier Unconfirmed

6438F–ATARM–21-Jun-10
The above configuration can be changed frame to frame, so the displayed window can be
moved rapidly. Note that the FRMSIZE field of DMAFRMCFG register must be updated with any
movement of the displaying window. Note also that the software must write bit DMAUPDT in
DMACON register after each configuration for it to be accepted by LCDC.
Note:
• Define the width of the complete frame buffer by programming in the field ADDRINC of
• Enable the 2D addressing mode by writing the DMA2DEN bit in DMACON register. If this bit
DMA2DCFG register the address increment between the last word of a line and the first word
of the next line (in number of 32-bit words).
is not activated, the values in the DMA2DCFG register are not considered and the controller
assumes that the displayed area occupies a continuous portion of the memory.
In 24 bpp packed mode, the DMA base address must point to a word containing a complete pixel
(possible values of PIXELOFF are 0 and 8). This means that the horizontal origin of the displaying
window must be a multiple of 4 pixels or a multiple of 4 pixels minus 1 (x = 4n or x = 4n-1, valid ori-
gins are pixel 0,3,4,7,8,11,12, etc.).
AT91SAM9G45
1123