AT91SAM9G45-CU-999 Atmel, AT91SAM9G45-CU-999 Datasheet - Page 947

• Manufacturer Part Number: AT91SAM9G45-CU-999
• Description: IC MCU ARM9 APMC 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G45-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Supplier Unconfirmed

40.10.2
6438F–ATARM–21-Jun-10
Touch Screen Mode
If the PDC is enabled, all the converted data are transferred contiguously in the memory buffer.
The bit LOWRES defines which resolution is used, either 8-bit or 10-bit, and thus the width of the
PDC memory buffer.
Writing TSAMOD to “Touch Screen Only Mode” automatically enables the touch screen pins as
analog inputs, and thus disables the digital function of the corresponding pins.
In Touch Screen Mode, the channels 0 to 3 corresponding to the Touch Screen inputs are auto-
matically activated and the bits CH0 to CH3 are automatically set in the
Status
The remaining channels can be either enabled or disabled by the user and their conversions are
performed at the end of each touch screen sequence.
The resolution is forced to 10 bits, regardless of the LOWRES bit setting.
At each trigger, if the bit PRES in
is performed to measure only position.
The resulting buffer is 16 bits wide and its structure stored in memory is:
5. If Channel 1 is enabled, convert Channel 1 and store result in both TSADCC_CDR1
6. If Channel 2 is enabled, convert Channel 2 and store result in both TSADCC_CDR2
7. If Channel 3 is enabled, convert Channel 3 and store result in both TSADCC_CDR3
8. If Channel 4 to Channel 7 are enabled, convert the Channels and store result in the cor-
9. If SLEEP is set, sleep down the ADC cell.
1. If SLEEP is set, wake up the ADC cell and wait for the Startup Time.
2. Close the switches on the inputs X
3. Convert Channel X
4. Close the switches on the inputs X
5. Convert Channel X
6. Close the switches on the inputs X
7. Convert Channel Y
8. Close the switches on the inputs Y
9. Convert Channel Y
10. Close the switches on the inputs Y
11. Convert Channel Y
12. Close the switches on the inputs Y
13. Convert Channel X
14. If Channel 4 to Channel 7 are enabled, convert the Channels and store result in the cor-
15. If SLEEP is set, sleep down the ADC cell.
and TSADCC_LCDR.
and TSADCC_LCDR.
and TSADCC_LCDR.
responding TSADCC_CDRx and TSADCC_LCDR.
result in both TSADCC_CDR0 and TSADCC_LCDR.
result in both TSADCC_CDR1 and TSADCC_LCDR.
result in both TSADCC_CDR2 and TSADCC_LCDR.
result in both TSADCC_CDR3 and TSADCC_LCDR.
responding TSADCC_CDRx and TSADCC_LCDR.
Register”.
P
P
P
P
M
M
, subtract TSADCC_CDR1 from the result and store the subtraction
, subtract TSADCC_CDR1 from the result and store the subtraction
, subtract TSADCC_CDR3 from the result and store the subtraction
, subtract TSADCC_CDR3 from the result and store the subtraction
and store the result in TSADCC_CDR1.
and store the result in TSADCC_CDR3.
“TSADCC Mode Register”
P
P
P
P
P
P
and X
and X
and X
and Y
and Y
and Y
M
M
M
M
M
M
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
is disabled, the following sequence
AT91SAM9G45
“TSADCC Channel
947