DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 136

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

Section 6 ROM
6.2.2
FLMCR2 is a register that indicates the state of flash memory programming/erasure. FLMCR2 is a
read-only register, and should not be written to.
Rev. 3.00 May 15, 2007 Page 102 of 516
REJ09B0152-0300
Bit
3
2
1
0
Bit
7
6 to 0
Bit Name
EV
PV
E
P
Bit Name
FLER

Flash Memory Control Register 2 (FLMCR2)
Initial
Value
0
0
0
0
Initial
Value
0
All 0
R/W
R/W
R/W
R/W
R/W
R/W
R

Description
Erase-Verify
When this bit is set to 1, the flash memory enters to
erasing-verifying mode. When it is cleared to 0, erasing-
verifying mode is released.
Program-Verify
When this bit is set to 1, the flash memory enters the
programming-verifying mode. When it is cleared to 0,
programming-verifying mode is released.
Erase
When this bit is set to 1 while SWE=1 and ESU=1, the
flash memory enters the erasing mode. When it is cleared
to 0, the erasing mode is released.
Program
When this bit is set to 1 while SWE=1 and PSU=1, the
flash memory enters the programming mode. When it is
cleared to 0, the programming mode is released.
Description
Flash Memory Error
Indicates that an error has occurred during programming
or erasing flash memory. When this bit is set to 1, flash
memory enters the error-protection state.
See section 6.5.3, Error Protection, for details.
Reserved
These bits are always read as 0.