DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 314

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

Section 14 Serial Communication Interface 3 (SCI3, IrDA)
14.8.7
In a receive operation, the SCI3 continually checks the RDRF flag. If bit RDRF is cleared to 0
when reception of one frame ends, normal data reception is completed. If bit RDRF is set to 1, this
indicates that an overrun error has occurred.
When the contents of RDR are read, bit RDRF is cleared to 0 automatically. Therefore, if RDR is
read more than once, the second and subsequent read operations will be performed while bit
RDRF is cleared to 0. Note that, when an RDR read is performed while bit RDRF is cleared to 0,
if the read operation coincides with completion of reception of a frame, the next frame of data may
be read. This is shown in figure 14.19.
In this case, only a single RDR read operation (not two or more) should be performed after first
checking that bit RDRF is set to 1. If two or more reads are performed, the data read the first time
should be transferred to RAM, etc., and the RAM contents used. Also, ensure that there is
sufficient margin in an RDR read operation before reception of the next frame is completed. To be
precise in terms of timing, the RDR read should be completed before bit 7 is transferred in clock
synchronous mode, or before the STOP bit is transferred in asynchronous mode.
Rev. 3.00 May 15, 2007 Page 280 of 516
REJ09B0152-0300
Communication line
RDRF
RDR
Relation between RDR Reading and bit RDRF
Figure 14.19 Relation between RDR Read Timing and Data
Frame 1
Data 1
RDR read
Frame 2
Data 2
Data 1
Data 1 is read at point (A)
Data 2 is read at point (B)
(A)
RDR read
(B)
Frame 3
Data 3
Data 2