M30624FGNGP#D5 Renesas Electronics America, M30624FGNGP#D5 Datasheet - Page 207

• Manufacturer Part Number: M30624FGNGP#D5
• Description: IC M16C MCU FLASH 256K 100LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30624FGNGP#D5

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 20K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

204
CPU Rewrite Mode (Flash Memory Version)
Table 1.29.2. Definition of each bit in status register
Each bit of
SR7 (bit7)
SR6 (bit6)
SR5 (bit5)
SR4 (bit4)
SR3 (bit3)
SR2 (bit2)
SR1 (bit1)
SR0 (bit0)
Program status (SR4)
SRD
The program status informs the operating status of write operation to the CPU. When a write error
occurs, it is set to “1”.
The program status is reset to “0” when cleared.
When an erase command is in error (which occurs if the command entered after the block erase
command (20
(SR5) are set to “1”.
When the program status or erase status =“1”, only the following flash commands will be accepted:
Read Array, Read Status Register, and Clear Status Register.
Also, in one of the following cases, both SR4 and SR5 are set to 1 (command sequence error):
(1) When the valid command is not entered correctly
(2) When the data entered in the second bus cycle of lock bit program (77
(20
entered, read array is assumed and the command that has been set up in the first bus cycle is
canceled.
16
/D0
Reserved
Reserved
Reserved
Reserved
Reserved
Sequencer status
Erase status
Program status
16
16
), or erase all unlock blocks (A7
) is not the confirmation command (D0
Status name
16
/D0
Terminated in error
Terminated in error
16
16
) is not the D0
), both the program status and erase status
Ready
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
"1"
-
-
-
-
-
Definition
16
or FF
Terminated normally
Terminated normally
16
16
M16C / 62N Group
. However, if FF
Mitsubishi microcomputers
/D0
Busy
"0"
16
-
-
-
-
-
), block erase
16
is