UPD78F1203MC-CAB-AX Renesas Electronics America, UPD78F1203MC-CAB-AX Datasheet - Page 387

• Manufacturer Part Number: UPD78F1203MC-CAB-AX
• Description: MCU 16BIT 78K0R/LX3 30-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1203MC-CAB-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7.5 Operation Using Inverter Control Function
7.5.1 Operation as real-time output function (type 1)
output trigger generation channel.
interval and generates a real-time output trigger.
from TOm by the real-time output trigger.
following expression.
the interval timer mode.
time, INTTMn is not output and TOn is not toggled when MDn0 of TMRn is 0. INTTMn is output and TOn is toggled
when MDn0 of TMRn is 1.
value of TDRn again at the same timing. Similar operation is continued hereafter.
channel.
(TRCn = 1) is controlled by the TREm and TRCm bits. The TOm output level will not change by only rewriting TROm.
output timing of the real-time output trigger generation channel. In the lower channel, TOm is not toggled at the
INTTMn output timing of the real-time output trigger generation channel when TREm = 0 or TRCm = 1.
functions.
The values of TROn and TROm can be output from TOn and TOm by using the INTTMn output of the real-time
This function is an extension of the function described in 6.7.1 Operation as interval timer/square wave output.
The real-time output trigger generation channel (channel to which TRCn = 1 is set) outputs INTTMn at a fixed
The real-time output channel (channels to which TRCm = 0 and TREm = 1 are set) outputs the set value of TROm
The interrupt generation period of the real-time output trigger generation channel
The channel to which TRCn = 1 was set becomes the real-time output trigger generation channel and operates in
TCRn loads the value of TDRn at the first count clock, after the channel start trigger bit (TSn) is set to 1. At this
Afterward, TCRn counts down along with the count clock.
When TCRn has become 0000H, INTTMn is output and TOn is toggled upon the next count clock. TCRn loads the
The set value of TROn is output from TOn at the INTTMn output timing of the real-time output trigger generation
TOm of the lower channel (real-time output channel (TRCm = 0)) of the real-time output trigger generation channel
When TREm of the real-time output channel (TRCm = 0) is 1, TOm outputs the set value of TROm at the INTTMn
When this function is used, TCRm, TDRm, and INTTMm of the lower channel can be operated as different
Remark n = 01 to 10 (78K0R/IB3: n = 01 to 07)
INTTMn generation period = Count clock period × (Set value of TDRn + 1)
m = 02 to 11 (78K0R/IB3: m = 02 to 07)
CHAPTER 7 INVERTER CONTROL FUNCTIONS
User’s Manual U19678EJ1V1UD
can be calculated by the
385