UPD78F1203MC-CAB-AX Renesas Electronics America, UPD78F1203MC-CAB-AX Datasheet - Page 566

• Manufacturer Part Number: UPD78F1203MC-CAB-AX
• Description: MCU 16BIT 78K0R/LX3 30-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1203MC-CAB-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

10.3 Register Controlling Watchdog Timer
564
The watchdog timer is controlled by the watchdog timer enable register (WDTE).
(1) Watchdog timer enable register (WDTE)
Writing “ACH” to WDTE clears the watchdog timer counter and starts counting again.
This register can be set by an 8-bit memory manipulation instruction.
Reset signal generation sets this register to 9AH or 1AH
Note The WDTE reset value differs depending on the WDTON setting value of the option byte (000C0H). To
Cautions 1. If a value other than “ACH” is written to WDTE, an internal reset signal is generated.
Address: FFFABH
Symbol
WDTE
operate watchdog timer, set WDTON to 1.
2. If a 1-bit memory manipulation instruction is executed for WDTE, an internal reset signal
3. The value read from WDTE is 9AH/1AH (this differs from the written value (ACH)).
0 (watchdog timer count operation disabled)
1 (watchdog timer count operation enabled)
is generated.
7
Figure 10-2. Format of Watchdog Timer Enable Register (WDTE)
After reset: 9AH/1AH
WDTON Setting Value
6
CHAPTER 10 WATCHDOG TIMER
5
User’s Manual U19678EJ1V1UD
Note
R/W
4
Note
.
1AH
9AH
3
WDTE Reset Value
2
1
0