UPD78F1203MC-CAB-AX Renesas Electronics America, UPD78F1203MC-CAB-AX Datasheet - Page 414

• Manufacturer Part Number: UPD78F1203MC-CAB-AX
• Description: MCU 16BIT 78K0R/LX3 30-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1203MC-CAB-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Remark m = 02 to 07
412
Operation
stop
TAUS
stop
Figure 7-32. Operation Procedure When Triangular Wave PWM Output Function Is Used (2/2)
The TT00 (master) and TTm (slave) bits are set to 1 at
the same time.
The TOE00 and TOEm bits are cleared to 0 and values
are set to the TO00 and TOm bits.
To hold the TO00 and TOm pin output levels
When holding the TO00 and TOm pin output levels is
not necessary
The TAU0EN and TAUOPEN bits of the PER2 register
are cleared to 0.
The TT00 and TTm bits automatically return to 0
because they are trigger bits.
Clears the TO00 and TOm bits to 0 after the value to
be held is set to the port register.
Switches the port mode register to input mode.
Software Operation
CHAPTER 7 INVERTER CONTROL FUNCTIONS
User’s Manual U19678EJ1V1UD
TE00, TEm = 0, and count operation stops.
The TO00 and TOm pins output the TO00 and TOm set
levels.
The TO00 and TOm pin output levels are held by port
function.
The TO00 and TOm pin output levels go into Hi-Z output
states.
Power-off status
TCR00 and TCRm hold count value and stops.
The TO00 and TOm outputs are not initialized but hold
current statuses.
All circuits are initialized and SFR of each channel is also
initialized.
(The TO00 and TOm bits are cleared to 0 and the TO00
and TOm pins are set to port mode.)
Hardware Status