PEB20534H-10V2.1 Infineon Technologies, PEB20534H-10V2.1 Datasheet - Page 49

• Manufacturer Part Number: PEB20534H-10V2.1
• Description: Communication Controller 208-Pin FQFP
• Manufacturer: Infineon Technologies

Abbreviations
Acronyms used in the block diagram are explained in the following:
DMAC - DMA Controller
GPP - General Purpose Port
JTAG - Joint Test Action Group
LBI - Local Bus Interface
MFP - Multi Function Port
PCI - Peripheral Components Interface
Rc- Receive
RFIFO - (Central) Receive FIFO
SCC3...0 - Serial Communication Controller 3...0
SSC - Synchronous Serial Controller
TFIFO - (Central) Transmit FIFO
Tx - Transmit
The functional blocks of the DSCC4 can be partitioned into three different groups:
– The first group provides the data transfer between the shared memory and on chip
– The second group supports the multiport and multiprotocol serial data communication.
– The third group provides control functions for external peripherals using the LBI and/
Note: In demultiplexed bus operation mode, the MFP only supplies the De-multiplexed
Data Sheet
registers/FIFOs. It consists of the PCI System Bus Interface, the 9 DMACs, the
Central RFIFO, the Central TFIFO and the Central Interrupt Queue.
It consists of four SCCs.
or low speed communication/control functions using SSC and/or GP. The third group
includes the peripheral blocks: GPP, SSC, LBI. These peripheral blocks can be used
in PCI mode configuration only.
address bus extension of the host interface.
49
Functional Description
PEB 20534
PEF 20534
2000-05-30