z16f2811 ZiLOG Semiconductor, z16f2811 Datasheet - Page 172

• Manufacturer Part Number: z16f2811
• Description: High Performance Microcontrollers
• Manufacturer: ZiLOG Semiconductor

Table 86. MultiProcessor Control Register (UxCTL1 with MSEL = 000b)
PS022006-0207
RESET
FIELD
ADDR
BITS
R/W
LIN-UART Control 1 Registers
MPMD[1]
R/W
7
0
Multiple registers (see
The register selected is determined by the mode select (
additional control over the LIN-UART operation.
Multiprocessor Control Register (LIN-UART Control 1 Register with
MSEL = 000b)
When
IRDA mode, baud rate timer mode as well as other features which applies to multiple
modes.
break is timed by hardware, and the SBRK bit is deasserted by hardware when the Break is
completed. The duration of the Break is determined by the TxBreakLength field of the LIN
control register. One or two Stop bits are automatically provided by the hardware in LIN
mode as defined by the Stop bit.
0 = No break is sent.
1 = The output of the transmitter is 0.
STOP—Stop Bit Select
0 = The transmitter sends one stop bit.
1 = The transmitter sends two stop bits.
LBEN—Loop Back Enable
0 = Normal operation.
1 = All transmitted data is looped back to the receiver within the IrDA module.
MPMD[1:0]—MULTIPROCESSOR Mode
If MULTIPROCESSOR (9-bit) mode is enabled,
00 = The LIN-UART generates an interrupt request on all received bytes (data and
01 = The LIN-UART generates an interrupt request only on received address bytes.
10 = The LIN-UART generates an interrupt request when a received address byte matches
the value stored in the address compare register and on all successive data bytes until an
MSEL
address).
MPEN
R/W
6
0
=
000b
MPMD[0]
, this register provides control for UART MULTIPROCESSOR mode,
R/W
FF-E203H, FF-E213H with MSEL = 000b
Table 86
5
0
P R E L I M I N A R Y
through
MPBT
R/W
4
0
Table
DEPOL
R/W
88) are accessible by a single bus address.
3
0
MSEL
BRGCTL
R/W
2
0
) field. These registers provide
Product Specification
ZNEO
RDAIRQ
R/W
1
0
™
Z16F Series
LIN-UART
IREN
R/W
0
0
158