VSC8211XVW Vitesse Semiconductor Corp, VSC8211XVW Datasheet - Page 116

• Manufacturer Part Number: VSC8211XVW
• Description: IC PHY 10/100/1000 SGL 117-LBGA
• Manufacturer: Vitesse Semiconductor Corp
• Type: PHY Transceiverr

Specifications of VSC8211XVW

• Number Of Drivers/receivers: 1/1
• Protocol: Gigabit Ethernet
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 117-LBGA
• Case: BGA
• Dc: 07+
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 907-1023

26.8 – Symbol Error Interrupt Status
When a symbol error is detected by the descrambler, bit 26.8 is set to “1” if bit
cleared when read.
26.7 – Descrambler Lock-Lost Interrupt Status
When the descrambler loses lock, bit 26.7 is set to “1” if bit
26.6 – TX FIFO Interrupt Status
When the TX FIFO enters an underflow or overflow condition, bit 26.6 is set to “1” if bit
automatically cleared when read.
26.5 – RX FIFO Interrupt Status
When the RX FIFO enters an underflow or overflow condition, bit 26.5 is set to “1” if bit
automatically cleared when read.
26.4 – AMS Media Change Interrupt Status
When the media type has changed as a result of AMS, bit 26.4 is set to “1” if bit
cleared when read.
26.3 – False Carrier Detect Interrupt Status
When the PHY has detected a false carrier, bit 26.3 is set to “1” if bit
read.
26.2 – Cable Impairment Detect Interrupt Status
When the PHY has detected an impairment on the CAT-5 media, bit 26.3 is set to “1” if bit
automatically cleared when read.
26.1 – MASTER/SLAVE Resolution Error Interrupt Status
When a MASTER/SLAVE resolution error is detected, bit 26.1 is set to “1” if bit
cleared when read.
26.0 – RXER Interrupt Status
When an RXER condition occurs, bit 26.0 is set to “1” if bit 25.0 is also set to “1”. This bit is automatically cleared when read.
VMDS-10105 Revision 4.1
October 2006
116 of 165
25.7
is also set to “1”. This bit is automatically cleared when read.
25.3
is also set to “1”. This bit is automatically cleared when
25.8
25.1
25.4
is also set to “1”. This bit is automatically
is also set to “1”. This bit is automatically
is also set to “1”. This bit is automatically
25.6
25.5
25.3
is also set to “1”. This bit is
is also set to “1”. This bit is
is also set to “1”. This bit is
Datasheet
VSC8211