ATA6613-EK Atmel, ATA6613-EK Datasheet - Page 105

• Manufacturer Part Number: ATA6613-EK
• Description: BOARD DEMO LIN-MCM FOR ATA6613
• Manufacturer: Atmel

Specifications of ATA6613-EK

• Main Purpose: Interface, LIN + MCU
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ATA6613
• Primary Attributes: LIN-SBC (System-Basis-Chip) Transceiver, LIN 2.0, Voltage Regulator, Window Watchdog
• Secondary Attributes: 16 kB Flash, 4 Power Modes: Pre-Normal, Normal, Sleep, Silent, 48-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

9111H–AUTO–01/11
• T1/OC0B/PCINT21 – Port D, Bit 5
• XCK/T0/PCINT20 – Port D, Bit 4
• INT1/OC2B/PCINT19 – Port D, Bit 3
• INT0/PCINT18 – Port D, Bit 2
• TXD/PCINT17 – Port D, Bit 1
• RXD/PCINT16 – Port D, Bit 0
T1, Timer/Counter1 counter source.
OC0B, Output Compare Match output: The PD5 pin can serve as an external output for
the Timer/Counter0 Compare Match B. The PD5 pin has to be configured as an output
(DDD5 set (one)) to serve this function. The OC0B pin is also the output pin for the PWM
mode timer function.
PCINT21: Pin Change Interrupt source 21. The PD5 pin can serve as an external interrupt
source.
XCK, USART external clock.
T0, Timer/Counter0 counter source.
PCINT20: Pin Change Interrupt source 20. The PD4 pin can serve as an external interrupt
source.
INT1, External Interrupt source 1: The PD3 pin can serve as an external interrupt source.
OC2B, Output Compare Match output: The PD3 pin can serve as an external output for
the Timer/Counter0 Compare Match B. The PD3 pin has to be configured as an output
(DDD3 set (one)) to serve this function. The OC2B pin is also the output pin for the PWM
mode timer function.
PCINT19: Pin Change Interrupt source 19. The PD3 pin can serve as an external interrupt
source.
INT0, External Interrupt source 0: The PD2 pin can serve as an external interrupt source.
PCINT18: Pin Change Interrupt source 18. The PD2 pin can serve as an external interrupt
source.
TXD, Transmit Data (Data output pin for the USART). When the USART Transmitter is
enabled, this pin is configured as an output regardless of the value of DDD1.
PCINT17: Pin Change Interrupt source 17. The PD1 pin can serve as an external interrupt
source.
RXD, Receive Data (Data input pin for the USART). When the USART Receiver is
enabled this pin is configured as an input regardless of the value of DDD0. When the
USART forces this pin to be an input, the pull-up can still be controlled by the PORTD0 bit.
PCINT16: Pin Change Interrupt source 16. The PD0 pin can serve as an external interrupt
source.
Atmel ATA6612/ATA6613
105