ATA6613-EK Atmel, ATA6613-EK Datasheet - Page 156

• Manufacturer Part Number: ATA6613-EK
• Description: BOARD DEMO LIN-MCM FOR ATA6613
• Manufacturer: Atmel

Specifications of ATA6613-EK

• Main Purpose: Interface, LIN + MCU
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ATA6613
• Primary Attributes: LIN-SBC (System-Basis-Chip) Transceiver, LIN 2.0, Voltage Regulator, Window Watchdog
• Secondary Attributes: 16 kB Flash, 4 Power Modes: Pre-Normal, Normal, Sleep, Silent, 48-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

156
Atmel ATA6612/ATA6613
Table 6-55
correct or the phase and frequency correct, PWM mode.
Table 6-55.
Note:
• Bit 1:0 – WGM11:0: Waveform Generation Mode
COM1A1/COM1B1
Combined with the WGM13:2 bits found in the TCCR1B Register, these bits control the
counting sequence of the counter, the source for maximum (TOP) counter value, and what
type of waveform generation to be used (see
tion supported by the Timer/Counter unit are: Normal mode (counter), Clear Timer on
Compare match (CTC) mode, and three types of Pulse Width Modulation (PWM) modes
(see
1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is set.
“Modes of Operation” on page
0
0
1
1
shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the phase
See
Compare Output Mode, Phase Correct and Phase and Frequency Correct
PWM
“Phase Correct PWM Mode” on page 149
(1)
COM1A0/COM1B0
0
1
0
1
145).
Description
Normal port operation, OC1A/OC1B disconnected.
WGM13:0 = 8, 9, 10 or 11: Toggle OC1A on Compare
Match, OC1B disconnected (normal port operation). For
all other WGM1 settings, normal port operation,
OC1A/OC1B disconnected.
Clear OC1A/OC1B on Compare Match when
up-counting. Set OC1A/OC1B on Compare Match when
downcounting.
Set OC1A/OC1B on Compare Match when up-counting.
Clear OC1A/OC1B on Compare Match when
downcounting.
Table 6-56 on page
for more details.
157). Modes of opera-
9111H–AUTO–01/11