MC-78F0712-KIT Renesas Electronics America, MC-78F0712-KIT Datasheet - Page 26

• Manufacturer Part Number: MC-78F0712-KIT
• Description: KIT REF SYSTEM 78K0 UPD78F0712
• Manufacturer: Renesas Electronics America

Specifications of MC-78F0712-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

<R>
2.2.3
(1) Port mode
(2) Control mode
2.2.4
timer I/O.
(1) Port mode
(2) Control mode
2.2.5
24
P20 to P23 function as an 4-bit input-only port. These pins also function as pins for A/D converter analog input.
The following operation modes can be specified in 1-bit units.
P50, P53, and P54 function as an 3-bit I/O port. These pins also function as external interrupt request input and
The following operation modes can be specified.
These are 10-bit inverter control timer output pins.
And, these pins function also as real-time output port pins.
P20 to P23 function as an 4-bit input-only port
P20 to P23 function as A/D converter analog input pins (ANI0 to ANI3). When using these pins as analog input
pins, see (5) ANI0/P20 to ANI3/P23 in 13.7 Cautions for A/D Converter.
P50, P53, and P54 function as an 3-bit I/O port. P50, P53, and P54 can be set to input or output in 1-bit units
using port mode register 5 (PM5). Use of an on-chip pull-up resistor can be specified by pull-up resistor option
register 5 (PU5).
P50, P53, and P54 function as the pins for the external interrupt request input and timer I/O.
(a) INTP5
(b) TI50
(c) TO50
(d) TI000
(e) TI001
(f) TO00
Note Connect AV
P20 to P23 (port 2)
P50, P53, P54 (port 5)
TW0TO0/RTP10 to TW0TO5/RTP15
This is the external interrupt request input pin for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
This is the pin for inputting an external count clock to 8-bit timer/event counter 50.
This is timer output pin from 8-bit timer/event counter 50.
This is the pin for inputting an external count clock to 16-bit timer/event counters 00 and is also for inputting a
capture trigger signal to the capture registers (CR00, CR01).
This is the pin for inputting a capture trigger signal to the capture register (CR00) of 16-bit timer/event
counters 00.
This is timer output pin from 16-bit timer/event counter 00.
REF
to V
DD
when port 2 is used as a digital port.
CHAPTER 2 PIN FUNCTIONS
User’s Manual U17890EJ2V0UD
Note
.