MCF5214CVF66 Freescale Semiconductor, MCF5214CVF66 Datasheet - Page 171

• Manufacturer Part Number: MCF5214CVF66
• Description: IC MPU 32BIT COLDF 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5214CVF66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Package: 256MA-BGA
• Device Core: ColdFire
• Family Name: MCF521x
• Maximum Speed: 66 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 142
• Interface Type: QSPI/UART/I2C/CAN
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 8
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Chapter 9
Clock Module
The clock module configures the device for one of several clocking methods. Clocking modes include
internal phase-locked loop (PLL) clocking with either an external clock reference or an external crystal
reference supported by an internal crystal amplifier. The PLL can also be disabled and an external
oscillator can be used to clock the device directly. The clock module contains:
9.1
Features of the clock module include:
9.2
The clock module can be operated in normal PLL mode (default), 1:1 PLL mode, or external clock mode.
9.2.1
In normal PLL mode, the PLL is fully programmable. It can synthesize frequencies ranging from 2x to 9x
the reference frequency and has a post divider capable of reducing this synthesized frequency without
disturbing the PLL. The PLL reference can be either a crystal oscillator or an external clock.
9.2.2
In 1:1 PLL mode, the PLL synthesizes a frequency equal to the external clock input reference frequency.
The post divider is not active.
9.2.3
In external clock mode, the PLL is bypassed, and the external clock is applied to EXTAL. The resulting
operating frequency is equal to the external clock frequency.
Freescale Semiconductor
•
•
•
•
•
•
•
•
Crystal amplifier and oscillator (OSC)
Phase-locked loop (PLL)
Reduced frequency divider (RFD)
Status and control registers
Control logic
2- to 10-MHz reference crystal oscillator
Support for low-power modes
Separate clock out signal
Features
Modes of Operation
Normal PLL Mode
1:1 PLL Mode
External Clock Mode
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
9-1