EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 476

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

11
USBCfgCtrl
11-36
Universal Serial Bus Host Controller
EP93xx User’s Guide
31
15
Address:
Default:
Definition:
Bit Descriptions:
30
14
29
13
28
12
OCIC:
PRSC:
0x8002_0080 - Read/Write
0x0000_0000
Used to implement some input signals to USB host controller for configuration
through software.
RSVD:
TPOC:
TRCS:
27
11
RSVD
26
10
Copyright 2007 Cirrus Logic
25
9
PortOverCurrentIndicatorChange. This bit is valid only if
overcurrent conditions are reported on a per-port basis.
This bit is set when Root Hub changes the
PortOverCurrentIndicator bit. The HCD writes a “1” to
clear this bit. Writing a “0” has no effect.
0 = no change in PortOverCurrentIndicator
1 = PortOverCurrentIndicator has changed
PortResetStatusChange. This bit is set at the end of the
10 ms port reset signal. The HCD writes a “1” to clear this
bit. Writing a “0” has no effect.
0 = port reset is not complete
1 = port reset is complete
Reserved. Unknown During Read.
When asserted by software, the corresponding port will
enter DISCONNECT state. These bits must be cleared
before the ports can be reused.
Inverted internally and sent out as APP_CntSelN signal to
uhostc_top. Internally known as TicRegCntSel.
APP_CntSelN is used for selecting the counter value for
either simulation or real-time for the 1 ms frame duration
used internally. It should be usually set to “0”. Setting it to
“1” will cause the internal counter count to be a partial full
count.
24
8
RSVD
23
7
22
6
21
5
TRCS
20
4
19
3
TPOC
18
2
17
1
DS785UM1
RSVD
16
0