EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 739

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

DS785UM1
25.1 Introduction
25.2 Touch Screen Controller Operation
The touch screen controller is a hardware engine that controls scanning for 4, 5, 7, or 8-wire
analog resistive touch screens (TS). The engine performs all sampling, averaging, and range
checking for analog-to-digital converter values. The hardware engine also controls an analog
switch array for controlling the different scan modes.
Through the APB interface, it is possible to disable the touch screen hardware engine and
directly control the switch matrix and the analog-to-digital converter. This allows for the
implementation of more complex software scanning algorithms if desired. However, the
hardware engine provides all features necessary to implement a standard interface and
eliminates almost all ARM Core intervention in the scanning process.
For both X and Y axes, the touch screen controller engine does the following:
Many touch screen controllers send a continuous information stream to the processor when
the touch screen is in use. This controller, in contrast, only interrupts the ARM Core when the
stimulus change is significant.
To understand the controller operation, it is first important to understand the electrical
implementation of touch screen technologies. The schematics for various resistive touch
screen technologies are shown in
layers are pressed together, a resistive contact is made.
Note: The EP9301 and EP9302 processors each support a general 5-bit ADC, but no touch
Note: The EP9307, EP9312, and EP9315 processors each support up to an 8-wire touch
• Takes 4, 8, 16, or 32 sample sets.
• Checks to see if the deviation in the sample set is too great.
• Averages the samples.
• Checks the average to see if the move is too great to be realistic.
• Checks to see if the move is large enough to bother the ARM Core.
screen .
screen or a general 12-bit ADC.
Copyright 2007 Cirrus Logic
25Analog Touch Screen Interface
Figure
25-1. When the front and back indium-tin-oxide
Chapter 25
25-1
25