DF2398F20V Renesas Electronics America, DF2398F20V Datasheet - Page 356

• Manufacturer Part Number: DF2398F20V
• Description: IC H8S/2300 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2398F20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

9.12.4
Port E has a on-chip MOS input pull-up function that can be controlled by software. This MOS input pull-up function can
be used in modes 4 to 6 when 8-bit bus mode is selected, or in mode 7, and can be specified as on or off on an individual
bit basis.
When a PEDDR bit is cleared to 0 in mode 4, 5, or 6 when 8-bit bus mode is selected, or in mode 7, setting the
corresponding PEPCR bit to 1 turns on the MOS input pull-up for that pin.
The MOS input pull-up function is in the off state after a power-on reset, and in hardware standby mode. The prior state is
retained after a manual reset*, and in software standby mode.
Table 9-22 summarizes the MOS input pull-up states.
Note: * Manual reset is only supported in the H8S/2357 ZTAT.
Table 9-22 MOS Input Pull-Up States (Port E)
Legend:
OFF:
ON/OFF: On when PEDDR = 0 and PEPCR = 1; otherwise off.
Note:
Rev.6.00 Oct.28.2004 page 326 of 1016
REJ09B0138-0600H
*
MOS Input Pull-Up Function (On-Chip ROM Version Only)
MOS input pull-up is always off.
Manual reset is only supported in the H8S/2357 ZTAT.
Modes
7
4 to 6
8-bit bus
16-bit bus
Power-On
Reset
OFF
Hardware
Standby Mode
Manual
Reset*
ON/OFF
OFF
Software
Standby Mode
In Other
Operations