D6417760BP200ADV Renesas Electronics America, D6417760BP200ADV Datasheet - Page 1129

• Manufacturer Part Number: D6417760BP200ADV
• Description: IC SUPER H MPU ROMLESS 256BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of D6417760BP200ADV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit
13
12
Bit
Name
ADST
DMASL
Initial
Value
0
0
R/W
R/W
R/W
Description
A/D Start
Starts or stops A/D conversion. This bit remains set to 1
during A/D conversion. It can also be set to 1 by external
trigger input (ADTRG) pin (except in multi mode).
0: A/D conversion is stopped
1:
•
•
•
DMAC Select
Selects an interrupt or activation of the DMAC due to the
end of A/D conversion. Do not change the DMASL bit
setting during A/D conversion.
0: An interrupt by the end of A/D conversion is selected
1: Activation of the DMAC by the end of A/D conversion is
selected
Single mode: A/D conversion starts. This bit is cleared
to 0 automatically when conversion on the specified
channel ends. Even when the ADST bit is cleared to 0
(by software), A/D conversion does not stop (0 cannot
be written to this bit during A/D conversion).
Multi mode: A/D conversion starts. This bit is cleared
to 0 automatically when conversion on the specified
channels has been performed for one cycle. When
the ADST bit is cleared to 0 (by software), A/D
conversion stops when the currently executed
channel ends.
Scan mode: A/D conversion starts. A/D conversion
continues without a break until the ADST bit is cleared
to 0 by software or until all registers are initialized by
a power-on or manual reset or in hardware standby,
module standby, or software standby mode. For the
standby modes, refer to section 29.7.4, Notes on
Standby Modes.
Rev. 2.00 Feb. 12, 2010 Page 1045 of 1330
REJ09B0554-0200