D6417760BP200ADV Renesas Electronics America, D6417760BP200ADV Datasheet - Page 892

• Manufacturer Part Number: D6417760BP200ADV
• Description: IC SUPER H MPU ROMLESS 256BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of D6417760BP200ADV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Rev. 2.00 Feb. 12, 2010 Page 808 of 1330
REJ09B0554-0200
Bit
9
8
7
6
Bit Name
TST1
TST0
MCR7
⎯
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R
Description
Controls the Tx pin to output transmit data or
recessive bits. When this bit is enabled (cleared to
0), the internal transmit output value appears on
the Tx pin. When this bit is disabled (set to 1), the
Tx Output pin always remains recessive or Tx
value is internally looped back the internal Rx if
Enable Internal Loop = 1.
0: External Tx pin value is supplied for the CAN
1: Internal Loop Enable = 0: Tx is always
Enables/ disables the internal Tx looped back to
the internal Rx. For details, refer to 22.6
Operation.
0: Rx is fed from the Rx pin.
1: Rx is fed from the internal Tx signal.
Enables/disables the Auto wake mode. If this bit is
set, HCAN2 automatically cancels the Sleep
Mode (MCR5) by detecting CAN bus activity
(dominant bit). If MCR7 is cleared HCAN2 does
not automatically cancel the Sleep Mode.
0: HCAN2 does not automatically cancel
1: HCAN2 automatically cancels Sleep Mode
Reserved
The write value should always be 0. The read
value is not guaranteed.
Disable Tx Output
Enable Internal Loop
Auto- Wake Mode
Interface block.
recessive on the Tx pin.
Internal Loop Enable = 1: Tx is internally
looped back the internal Rx.
Sleep Mode.
when the CAN bus active is detected.