PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 148

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F46J50 FAMILY
9.7.6
The PIC18F46J50 Family of devices implements a total
of 37 registers for remappable peripheral configuration
of 44-pin devices. The 28-pin devices have 31 registers
for remappable peripheral configuration.
REGISTER 9-5:
DS39931C-page 148
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-1
bit 0
Note 1:
U-0
—
Register values can only be changed if PPSCON<IOLOCK> = 0.
PERIPHERAL PIN SELECT
REGISTERS
Unimplemented: Read as ‘0’
IOLOCK: I/O Lock Enable bit
1 = I/O lock is active, RPORx and RPINRx registers are write-protected
0 = I/O lock is not active, pin configurations can be changed
U-0
—
PPSCON: PERIPHERAL PIN SELECT INPUT REGISTER 0 (BANKED EFFh)
W = Writable bit
‘1’ = Bit is set
U-0
—
U-0
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
—
Note:
Input and output register values can only
be changed if PPS<IOLOCK> = 0. See
Example 9-7 for a specific command
sequence.
U-0
—
© 2009 Microchip Technology Inc.
x = Bit is unknown
U-0
—
IOLOCK
R/W-0
(1)
bit 0