PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 256

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

setting the PxRSEN bit in the ECCPxDEL register.
PIC18F46J50 FAMILY
FIGURE 17-14:
17.5.5
The Enhanced PWM can be configured to automatically
restart the PWM signal once the auto-shutdown condi-
tion has been removed. Auto-restart is enabled by
If auto-restart is enabled, the ECCPxASE bit will
remain set as long as the auto-shutdown condition is
active. When the auto-shutdown condition is removed,
the ECCPxASE bit will be cleared via hardware and
normal operation will resume.
FIGURE 17-15:
DS39931C-page 256
Shutdown
Shutdown
ECCPxASE bit
PWM
ECCPxASE bit
PWM
AUTO-RESTART MODE
Activity
Activity
Event
Event
PWM Period
PWM AUTO-SHUTDOWN WITH FIRMWARE RESTART (PxRSEN = 0)
PWM AUTO-SHUTDOWN WITH AUTO-RESTART ENABLED (PxRSEN = 1)
PWM Period
Start of
Start of
Normal PWM
Normal PWM
PWM Period
Event Occurs
Event Occurs
PWM Period
Shutdown
Shutdown
The module will wait until the next PWM period begins,
however, before re-enabling the output pin. This behav-
ior allows the auto-shutdown with auto-restart features
to be used in applications based on current mode PWM
control.
Event Clears
Event Clears
Shutdown
Shutdown
ECCPxASE
Cleared by
Firmware
© 2009 Microchip Technology Inc.
Resumes
Resumes
PWM
PWM