PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 380

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F46J50 FAMILY
REGISTER 22-1:
DS39931C-page 380
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4-3
bit 2
bit 1-0
Note 1:
R/W-0
CON
The CMxIF is automatically set any time this mode is selected and must be cleared by the application after
the initial configuration.
CON: Comparator Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
COE: Comparator Output Enable bit
1 = Comparator output is present on the CxOUT pin (assigned in the PPS module)
0 = Comparator output is internal only
CPOL: Comparator Output Polarity Select bit
1 = Comparator output is inverted
0 = Comparator output is not inverted
EVPOL<1:0>: Interrupt Polarity Select bits
11 = Interrupt generation on any change of the output
10 = Interrupt generation only on high-to-low transition of the output
01 = Interrupt generation only on low-to-high transition of the output
00 = Interrupt generation is disabled
CREF: Comparator Reference Select bit (non-inverting input)
1 = Non-inverting input connects to internal CV
0 = Non-inverting input connects to CxINA pin
CCH<1:0>: Comparator Channel Select bits
11 = Inverting input of comparator connects to V
00 = Inverting input of comparator connects to CxINB pin
R/W-0
COE
CMxCON: COMPARATOR CONTROL x REGISTER (ACCESS FD2h, FD1h)
W = Writable bit
‘1’ = Bit is set
R/W-0
CPOL
EVPOL1
R/W-1
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EVPOL0
REF
R/W-1
IRV
voltage
(0.6V)
(1)
R/W-1
CREF
© 2009 Microchip Technology Inc.
x = Bit is unknown
R/W-1
CCH1
R/W-1
CCH0
bit 0