PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 173

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

10.2.2
When chip select is active and a write strobe occurs
(PMCS = 1 and PMWR = 1), the data from PMD<7:0>
is captured into the lower PMDIN1L register. The
PMPIF and IBF flag bits are set when the write
ends.The timing for the control signals in Write mode is
displayed in Figure 10-3. The polarity of the control
signals are configurable.
FIGURE 10-3:
FIGURE 10-4:
© 2009 Microchip Technology Inc.
PMD<7:0>
PMD<7:0>
PMCS1
PMCS1
PMWR
PMWR
PMPIF
PMPIF
PMRD
PMRD
OBE
OBE
IBF
IBF
WRITE TO SLAVE PORT
PARALLEL SLAVE PORT WRITE WAVEFORMS
PARALLEL SLAVE PORT READ WAVEFORMS
PIC18F46J50 FAMILY
10.2.3
When chip select is active and a read strobe occurs
(PMCS = 1 and PMRD = 1), the data from the
PMDOUT1L register (PMDOUT1L<7:0>) is presented
onto PMD<7:0>. Figure 10-4 provides the timing for the
control signals in Read mode.
|
|
READ FROM SLAVE PORT
Q4
Q4
|
|
Q1
Q1
|
|
Q2
Q2
|
|
DS39931C-page 173
Q3
Q3
|
|
Q4
Q4