PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 379

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

22.0
The analog comparator module contains two compara-
tors that can be independently configured in a variety of
ways. The inputs can be selected from the analog inputs
and two internal voltage references. The digital outputs
are available at the pin level and can also be read
through the control register. Multiple output and interrupt
event generation is also available. Figure 22-1 provides
a generic single comparator from the module.
Key features of the module are:
• Independent comparator control
• Programmable input configuration
• Output to both pin and register levels
• Programmable output polarity
• Independent interrupt generation for each
FIGURE 22-1:
© 2009 Microchip Technology Inc.
comparator with configurable interrupt-on-change
CCH<1:0>
CxINB
CV
CxINA
V
IRV
COMPARATOR MODULE
CREF
REF
0
1
0
3
COMPARATOR SIMPLIFIED BLOCK DIAGRAM
V
V
IN
IN
-
+
CON
Cx
PIC18F46J50 FAMILY
22.1
The CMxCON registers (Register 22-1) select the input
and output configuration for each comparator, as well
as the settings for interrupt generation.
The CMSTAT register (Register 22-2) provides the out-
put results of the comparators. The bits in this register
are read-only.
EVPOL<4:3>
Interrupt
Polarity
Logic
CPOL
Logic
Registers
COE
DS39931C-page 379
CxOUT
CMxIF
COUTx
(CMSTAT<1:0>)