PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 486

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F46J50 FAMILY
FIGURE 29-1:
FIGURE 29-2:
DS39931C-page 486
Note 1:
Note 1:
2:
When the USB module is enabled, V
module is not enabled, the wider limits shaded in grey apply. V
be high-impedance when the USB module is not in use.
V
When the USB module is enabled, V
the USB module is not enabled, the wider limits shaded in grey apply. V
may optionally be high-impedance when the USB module is not in use.
DD
and V
2.15V
4.0V
3.5V
3.0V
2.5V
3.00V
2.75V
2.50V
2.25V
2.00V
PIC18F46J50 FAMILY V
PIC18LF46J50 FAMILY V
DDCORE
0
0
must be maintained so that V
8 MHz
8 MHz
PIC18F46J50 Family Valid Operating Range
PIC18LF46J50 Family Valid Operating Range
USB
USB
DD
should be provided 3.0V-3.6V while V
should be provided 3.0V-3.6V while V
DDCORE
FREQUENCY GRAPH (INDUSTRIAL)
Frequency
Frequency
DDCORE
FREQUENCY GRAPH (INDUSTRIAL)
≤ V
USB
DD
.
should be maintained ≥ V
USB
should be maintained ≥ V
DD
DDCORE
must be ≥2.35V. When the USB
48 MHz
© 2009 Microchip Technology Inc.
48 MHz
must be ≥2.35V. When
3.6V
2.35V
DD
2.75V
2.35V
, but may optionally
(1)
(2)
(1)
DD
, but