PIC18F46J50-I/PT Microchip Technology, PIC18F46J50-I/PT Datasheet - Page 175

• Manufacturer Part Number: PIC18F46J50-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 2
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Interface Type: I2C/SPI/USART/USB
• On-chip Adc: 13-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164330 - MODULE SKT FOR 44TQFP 18F45J10
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

10.2.5
In the Addressable Parallel Slave Port mode
(
two extra inputs, PMA<1:0>, which are the address
lines 1 and 0. This makes the 4-byte buffer space
directly addressable as fixed pairs of read and write
buffers. As with Legacy Buffered mode, data is output
from PMDOUT1L, PMDOUT1H, PMDOUT2L and
PMDOUT2H, and is read in PMDIN1L, PMDIN1H,
PMDIN2L and PMDIN2H. Table 10-1 provides the
buffer addressing for the incoming address to the input
and output registers.
FIGURE 10-6:
10.2.5.1
When chip select is active and a read strobe occurs
(PMCS = 1 and PMRD = 1), the data from one of the
four output bytes is presented onto PMD<7:0>. Which
byte is read depends on the 2-bit address placed on
ADDR<1:0>. Table 10-1 provides the corresponding
FIGURE 10-7:
© 2009 Microchip Technology Inc.
PMMODEH<1:0> = 01), the module is configured with
PMD<7:0>
PMA<1:0>
PMWR
Master
PMPIF
PMD<7:0>
PMA<1:0>
PMRD
PMCS
OBE
ADDRESSABLE PARALLEL SLAVE
PORT MODE
PMCS1
PMWR
PMRD
READ FROM SLAVE PORT
Address Bus
Data Bus
Control Lines
PARALLEL MASTER/SLAVE CONNECTION ADDRESSED BUFFER EXAMPLE
PARALLEL SLAVE PORT READ WAVEFORMS
PMD<7:0>
PMA<1:0>
PMCS
PMRD
PMWR
PIC18F46J50 FAMILY
TABLE 10-1:
output registers and their associated address. When an
output buffer is read, the corresponding OBxE bit is set.
The OBxE flag bit is set when all the buffers are empty.
If any buffer is already empty, OBxE = 1, the next read
to that buffer will generate an OBUF event.
Address
Decode
Write
PMA<1:0>
00
01
10
11
PIC18F Slave
PMDOUT1L (0)
PMDOUT1H (1)
PMDOUT2H (3)
PMDOUT2L (2)
|
Q4
SLAVE MODE BUFFER
ADDRESSING
PMDOUT2H((3)
PMDOUT1H (1)
PMDOUT1L (0)
PMDOUT2L (2)
|
Register
Q1
(Buffer)
Output
Address
Decode
Read
|
Q2
PMDIN1H (1)
PMDIN2H (3)
PMDIN1L (0)
PMDIN2L (2)
|
DS39931C-page 175
Q3
Input Register
PMDIN1H (1)
PMDIN2H (3)
PMDIN1L (0)
PMDIN2L (2)
(Buffer)
|
Q4