HD64F3684FP Renesas Electronics America, HD64F3684FP Datasheet - Page 224

• Manufacturer Part Number: HD64F3684FP
• Description: IC H8 MCU FLASH 32K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3684FP

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 13 Timer Z
13.3.8
General Registers A, B, C, and D (GRA, GRB, GRC, and GRD)
GR are 16-bit registers. Timer Z has eight general registers (GR), four for each channel. The GR
registers are dual function 16-bit readable/writable registers, functioning as either output compare
or input capture registers. Functions can be switched by TIORA and TIORC.
The values in GR and TCNT are constantly compared with each other when the GR registers are
used as output compare registers. When the both values match, the IMFA to IMFD flags in TSR
are set to 1. Compare match outputs can be selected by TIORA and TIORC.
When the GR registers are used as input capture registers, the TCNT value is stored after detecting
external signals. At this point, IMFA to IMFD flags in the corresponding TSR are set to 1.
Detection edges for input capture signals can be selected by TIORA and TIORC.
When PWM mode, complementary PWM mode, or reset synchronous PWM mode is selected, the
values in TIORA and TIORC are ignored. Upon reset, the GR registers are set as output compare
registers (no output) and initialized to H'FFFF. The GR registers cannot be accessed in 8-bit units;
they must always be accessed as a 16-bit unit.
Rev.5.00 Nov. 02, 2005 Page 190 of 500
REJ09B0027-0500