PNX1501E NXP Semiconductors, PNX1501E Datasheet - Page 468

• Manufacturer Part Number: PNX1501E
• Description: Digital Signal Processors & Controllers (DSP, DSC) MEDIA PROCESSOR PNX15XX/266MHZ
• Manufacturer: NXP Semiconductors

Specifications of PNX1501E

• Product: DSPs
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-795
• Minimum Operating Temperature: 0 C
• Lead Free Status / Rohs Status: Details
• Other names: PNX1501E,557

Philips Semiconductors
Volume 1 of 1
12NC 9397 750 14321
Product data sheet
3.4.1 Record Synchronization Events
3.4.2 Buffer Synchronization Events
Starting output of sample data for each record is signaled by a output start event
(selected by the FGPO_CTL.REC_SYNC bits):
The record ends by reaching the programmed record size in the FGPO_REC_SIZE
register or by the next record start event, whichever comes first.
It takes 4 FGPO clock cycles to synchronize and react to events on the
fgpo_rec_sync pin in external record sync mode. If timestamps are enabled the
output is started on the next FGPO clock tick after the timestamp event.
Each buffer is started by a buffer start event. (selected by the
FGPO_CTL.BUF_SYNC bits):
The fgpo_buf_sync signal will only be observed after the current buffer is finished. It
takes 4 FGPO clock cycles to synchronize and react to events on the fgpo_buf_sync
pin in external buffer sync mode.
•
•
•
•
•
•
•
•
•
•
•
a rising edge on fgpo_rec_sync pin
a falling edge on fgpo_rec_sync pin
wait FGPO_REC_GAP clock cycles before starting next record, start first record
immediately
wait for timestamp event
occur immediately after the previous buffer is sent or when output is enabled
a rising edge on fgpo_buf_sync pin
a falling edge on fgpo_buf_sync pin
alternating rising and falling edges on fgpo_buf_sync pin, starting with the next
rising edge on fgpo_buf_sync pin
alternating rising and falling edges on fgpo_buf_sync pin, starting with the next
falling edge on fgpo_buf_sync pin
wait FGPO_BUF_SYNC clock cycles before starting next buffer, start first buffer
immediately
occur immediately after the previous buffer is sent or when output is started
Rev. 2 — 1 December 2004
Chapter 13: FGPO: Fast General Purpose Output
© Koninklijke Philips Electronics N.V. 2002-2003-2004. All rights reserved.
PNX15xx Series
13-14