DF3048BVX25V Renesas Electronics America, DF3048BVX25V Datasheet - Page 119

• Manufacturer Part Number: DF3048BVX25V
• Description: MCU 3/5V 128K PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of DF3048BVX25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

5.1
5.1.1
The interrupt controller has the following features:
Note: * For the H8/3048F-ONE (single power supply with flash memory), the NMI input may
Interrupt priority registers (IPRs) for setting interrupt priorities
Interrupts other than NMI can be assigned to two priority levels on a module-by-module basis
in interrupt priority registers A and B (IPRA and IPRB).
Three-level masking by the I and UI bits in the CPU condition code register (CCR)
Independent vector addresses
All interrupts are independently vectored; the interrupt service routine does not have to
identify the interrupt source.
Seven external interrupt pins
NMI has the highest priority and is always accepted * ; either the rising or falling edge can be
selected. For each of IRQ
independently.
Features
Overview
be prohibited. For details, refer to section 18.8.4, NMI Input Disable Conditions.
Section 5 Interrupt Controller
0
to IRQ
5
, sensing of the falling edge or level sensing can be selected
Rev. 3.00 Sep 27, 2006 page 91 of 872
Section 5 Interrupt Controller
REJ09B0325-0300