DF3048BVX25V Renesas Electronics America, DF3048BVX25V Datasheet - Page 281

• Manufacturer Part Number: DF3048BVX25V
• Description: MCU 3/5V 128K PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of DF3048BVX25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.5
The DMAC generates only DMA-end interrupts. Table 8.13 lists the interrupts and their priority.
Table 8.13 DMAC Interrupts
Interrupt
DEND0A
DEND0B
DEND1A
DEND1B
Each interrupt is enabled or disabled by the DTIE bit in the corresponding data transfer control
register (DTCR). Separate interrupt signals are sent to the interrupt controller.
The interrupt priority order among channels is channel 0 > channel 1 and channel A > channel B.
Figure 8.25 shows the DMA-end interrupt logic. An interrupt is requested whenever DTE = 0 and
DTIE = 1.
The DMA-end interrupt for the B channels (DENDB) is unavailable in full address mode. The
DTME bit does not affect interrupt operations.
Interrupts
Short Address Mode
End of transfer on channel 0A
End of transfer on channel 0B
End of transfer on channel 1A
End of transfer on channel 1B
DTIE
DTE
Figure 8.25 DMA-End Interrupt Logic
Description
Full Address Mode
End of transfer on channel 0
—
End of transfer on channel 1
—
Rev. 3.00 Sep 27, 2006 page 253 of 872
DMA-end interrupt
Section 8 DMA Controller
REJ09B0325-0300
High
Interrupt
Priority
Low