HD6413003TF16V Renesas Electronics America, HD6413003TF16V Datasheet - Page 160

• Manufacturer Part Number: HD6413003TF16V
• Description: MCU 5V 0K PB-FREE 112-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413003TF16V

• Core Size: 16-Bit
• Oscillator Type: Internal
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 50
• Program Memory Type: ROMless
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 112-QFP
• No. Of I/o's: 58
• Ram Memory Size: 512Byte
• Cpu Speed: 16MHz
• No. Of Timers: 11
• No. Of Pwm Channels: 4
• Digital Ic Case Style: QFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 4—Strobe Mode Select
valid when PSRAME = 0 and DRAME = 1. This bit is write-disabled when the PSRAME or
DRAME bit is set to 1.
Bit 4
CAS/WE
0
1
Bit 3—Address Multiplex Mode Select (M9/M8): Selects 8-bit or 9-bit column addressing.
The setting of this bit is valid when PSRAME = 0 and DRAME = 1. This bit is write-disabled
when the PSRAME or DRAME bit is set to 1.
Bit 3
M9/M8
0
1
Bit 2—Refresh Pin Enable (RFSHE): Enables or disables refresh signal output from the
RFSH pin. This bit is write-disabled when the PSRAME or DRAME bit is set to 1.
Bit 2
RFSHE
0
1
Bit 1—Reserved: Read-only bit, always read as 1.
Bit 0—Refresh Cycle Enable (RCYCE): Enables or disables insertion of refresh cycles.
The setting of this bit is valid when PSRAME = 1 or DRAME = 1. When PSRAME = 0 and
DRAME = 0, refresh cycles are not inserted regardless of the setting of this bit.
Bit 0
RCYCE Description
0
1
Description
8-bit column address mode
9-bit column address mode
Description
Refresh signal output at the RFSH pin is disabled
(the RFSH pin can be used as a generic input/output port)
Refresh signal output at the RFSH pin is enabled
Refresh cycles are disabled
Refresh cycles are enabled for area 3
Description
2WE mode
2CAS mode
(CAS/WE): Selects 2CAS or 2WE mode. The setting of this bit is
140
(Initial value)
(Initial value)
(Initial value)
(Initial value)