HD6413003TF16V Renesas Electronics America, HD6413003TF16V Datasheet - Page 434

• Manufacturer Part Number: HD6413003TF16V
• Description: MCU 5V 0K PB-FREE 112-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413003TF16V

• Core Size: 16-Bit
• Oscillator Type: Internal
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 50
• Program Memory Type: ROMless
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 112-QFP
• No. Of I/o's: 58
• Ram Memory Size: 512Byte
• Cpu Speed: 16MHz
• No. Of Timers: 11
• No. Of Pwm Channels: 4
• Digital Ic Case Style: QFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 7—Watchdog Timer Reset (WRST): During watchdog timer operation, this bit indicates that
TCNT has overflowed and generated a reset signal. This reset signal resets the entire H8/3003
chip internally. If bit RSTOE is set to 1, this reset signal is also output (low) at the RESO pin to
initialize external system devices.
Bit 7
WRST
0
1
Bit 6—Reset Output Enable (RSTOE): Enables or disables external output at the RESO pin of
the reset signal generated if TCNT overflows during watchdog timer operation.
Bit 6
RSTOE Description
0
1
Bits 5 to 0—Reserved: Read-only bits, always read as 1.
Description
[Clearing condition]
Cleared to 0 by reset signal input at RES pin, or by writing 0
[Setting condition]
Set when TCNT overflow generates a reset signal during watchdog timer operation
Reset signal is not output externally
Reset signal is output externally
414
(Initial value)
(Initial value)