HD6433682 ETC, HD6433682 Datasheet - Page 117

no-image

HD6433682

Manufacturer Part Number
HD6433682
Description
Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series
Manufacturer
ETC
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HD6433682A45HV
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
Part Number:
HD6433682C74HV
Manufacturer:
HITACHI/日立
Quantity:
20 000
The features of the 56-kbyte or 32-kbyte flash memories built into the flash memory (F-ZTAT)
version are summarized below.
7.1
Figure 7.1 shows the block configuration of flash memory. The thick lines indicate erasing units,
the narrow lines indicate programming units, and the values are addresses. The 56-kbyte flash
memory is divided into 1 kbyte
Erasing is performed in these units. Programming is performed in 128-byte units starting from an
address with lower eight bits H'00 or H'80.
ROM3560A_000120030300
1 block. The 32-kbyte flash memory is divided into 1 kbyte
Programming/erase methods
Reprogramming capability
On-board programming
Programmer mode
Automatic bit rate adjustment
Programming/erasing protection
Power-down mode
The flash memory is programmed 128 bytes at a time. Erase is performed in single-block
units. The flash memory is configured as follows: 1 kbyte
16 kbytes
kbytes
erased in turn.
The flash memory can be reprogrammed up to 1,000 times.
On-board programming/erasing can be done in boot mode, in which the boot program built
into the chip is started to erase or program of the entire flash memory. In normal user
program mode, individual blocks can be erased or programmed.
Flash memory can be programmed/erased in programmer mode using a PROM
programmer, as well as in on-board programming mode.
For data transfer in boot mode, this LSI's bit rate can be automatically adjusted to match
the transfer bit rate of the host.
Sets software protection against flash memory programming/erasing.
Operation of the power supply circuit can be partly halted in subactive mode. As a result,
flash memory can be read with low power consumption.
Block Configuration
1 block for H8/3684F. To erase the entire flash memory, each block must be
1 block, and 8 kbytes
4 blocks, 28 kbytes
Section 7 ROM
1 block for H8/3687F and 1 kbyte
1 block, 16 kbytes
4 blocks and 28 kbytes
Rev. 3.00, 05/03, page 87 of 472
4 blocks, 28 kbytes
1 block, and 8 kbytes
4 blocks and 28
1 blocks.
1 block,

Related parts for HD6433682