AT32UC3C1512C Automotive Atmel Corporation, AT32UC3C1512C Automotive Datasheet - Page 1072

• Manufacturer Part Number: AT32UC3C1512C Automotive
• Manufacturer: Atmel Corporation

35. Analog Comparator Interface (ACIFA)
35.1
35.2
9166C–AVR-08/11
Features
Overview
Rev: 1.0.0.0
•
•
•
•
•
•
•
The Analog Comparator Interface (ACIFA) is able to control two Analog Comparators (AC) with
identical behavior. An Analog Comparator compares two voltages and gives a compare output
depending on this comparison.
The ACIFA can be configured in normal mode (see
mode (see
The AC’s Inputs are programmable between internal inputs (DAC, voltage reference, ...) and
external input pins.
According to the comparison result, each comparator can trigger a separate interrupt in normal
mode. In window function, an additional interrupt can be triggered, depending if the voltage to be
compared is inside or outside the window.
The ACIFA is able to generate two output events that can be used through PEVC to trigger a
hardware process.
Control one set of two analog comparators
High speed option versus low power option
Selectable input hysteresis:
Input selection between external input pin and internal inputs
Window function
Interrupt on:
Two Analog comparators interface events available on pin through PEVC
– shortest propagation delay/highest current consumption
– longest propagation delay/lowest current consumption
– 0mV, 20mV, 50mV
– Rising edge, Falling edge, toggle
– Signal above/below window, signal inside/outside window
– startup time
Figure 35-2 on page 1073
).
Figure 35-1 on page
AT32UC3C
1073) or in window
1072