AT32UC3C1512C Automotive Atmel Corporation, AT32UC3C1512C Automotive Datasheet - Page 625

• Manufacturer Part Number: AT32UC3C1512C Automotive
• Manufacturer: Atmel Corporation

•
•
•
•
•
•
•
•
•
•
•
•
•
9166C–AVR-08/11
RSTNACK: Reset Non Acknowledge
RSTIT: Reset Iterations
SENDA: Send Address
STTTO: Start Time-out
STPBRK: Stop Break
STTBRK: Start Break
RSTSTA: Reset Status Bits
TXDIS: Transmitter Disable
TXEN: Transmitter Enable
RXDIS: Receiver Disable
RXEN: Receiver Enable
RSTTX: Reset Transmitter
RSTRX: Reset Receiver
0: No effect
1: Resets NACK in CSR.
0: No effect.
1: Resets ITERATION in CSR. No effect if the ISO7816 is not enabled.
0: No effect.
1: In Multidrop Mode only, the next character written to the THR is sent with the address bit set.
0: No effect.
1: Starts waiting for a character before clocking the time-out counter. Resets the status bit TIMEOUT in CSR.
0: No effect.
1: Stops transmission of the break after a minimum of one character length and transmits a high level during 12-bit periods. No
0: No effect.
1: Starts transmission of a break after the characters present in THR and the Transmit Shift Register have been transmitted. No
0: No effect.
1: Resets the status bits PARE, FRAME, OVRE, MANERR, LINBE, LINSFE, LINIPE, LINCE, LINSNRE and RXBRK in CSR.
0: No effect.
1: Disables the transmitter.
0: No effect.
1: Enables the transmitter if TXDIS is 0.
0: No effect.
1: Disables the receiver.
0: No effect.
1: Enables the receiver, if RXDIS is 0.
0: No effect.
1: Resets the transmitter.
0: No effect.
1: Resets the receiver.
effect if no break is being transmitted.
effect if a break is already being transmitted.
AT32UC3C
625